Coal Mine Crushing Shaft Group of Crusher

coal Crushing Group mine shaft

Yo: Fabricantes Buscando: Fabricantes

The operation effect of the crushing shaft group of the crusher directly affects the crushing capacity of the crusher and the production efficiency and economic benefit of the coal mine. Understanding the structural characteristics of the crushing shaft set of the crusher is conducive to reducing the failure rate of the scraper conveyor and improving its reliability.
structure
The crushing shaft is mainly composed of spindle, hammer body, hammer head, bearing seat, bearing, seal and other accessories.
The working principle of
The crushing shaft set of hammer crusher is fixed on the crusher frame by bearing pedestal at both ends, and driven to operate by transmission device (pulley or reducer). The hammer head on the crushing shaft set rotates at high speed, and large pieces of coal and coal gangue are crushed by impact.
Problems in the work process
Due to the harsh working environment and complex working conditions, the crushing shaft set of hammer crusher is prone to the following problems after a long time of work :(1) the bearing of the crushing shaft set is damaged, the seal fails; (2) the hammer head is severely worn down, becomes loose and falls off; (3) the bolts or nuts fastening the crushing shaft set become loose or rust dies.
maintenance
The broken shaft should be inspected regularly, and the fault should be stopped in time for inspection, maintenance or replacement. Pay attention to the lubrication of broken shaft sets, especially the regular lubrication of spindle bearing with lithium base grease.
That is the introduction of the hammer crusher crushing shaft set. Henan Shuanzhi as coal parts manufacturers, supply all kinds of scraper parts, transfer machine parts, hydraulic bracket parts, etc., welcome new and old customers to buy.